Icon

Shaft Groove Depth Controller

UAP1069 - USC Application

A Pepperl + Fuchs analogue proximity sensor is mounted on to shaft grooving machinery.

Tare Adjustment

The cutting head is lowered until just touching the shaft and P1 is pressed to take zero measurement.

Set Cut Depth

Constant a is used to set depth (-ve number)

Operation

The start button is pressed (RLY1 closes). When required depth is achieved RLY1 opens to stop cutting.

 

Program

File Comment
Help If unexpected results occur when loading the .usc file press back and click on help for instructions.
UAP1069a.usc First Issue.
UAP1069b.usc Changed tare storage method so that the tare value is retained after the USC701 is disconnected from the power supply. This a achieved with a non volatile save in constant j. CH1 no longer has the tare function built in, depth measurements are now taken from memory 4.

Analogue Process Control Services - The Signal Conditioning Specialist