| Page | 01 |
|---|
| Article | Description / Summary |
|---|---|
| UAP1075 | Auto / Manual Station (replace RT124, LOS406) When P1 and P2 are low the output is 4mA regardless of the CH1 and CH2 input values. When P1 and P2 are high the output is 20mA regardless of the CH1 and CH2 input values. When P1 is high and P2 is low the output follows the potentiometer input ... |
| UAP1061 | Replace DVA110 or PSC170 with USC701 About The DVA110 (or PSC170) The APCS DA110 is a dual alarm module that compares two input signals and provides two relay contact outputs, input 1 greater than input 2 (IN1>IN2) and input 2 greater than input 1 (IN1<IN2). The ... |
| UAP0042 | Replace PDC171 with USC701 The 100 APCS "PULSE DURATION CONTROLLER" PDC171 is for applications where a fixed time interval is required to be divided into an ON/OFF ratio dependent upon the input signal level. The fixed pulse interval time can be set ... |