| Page | 01 |
|---|
| Article | Description / Summary |
|---|---|
| HLP0007 | a) The USC Centre The USC701 is a Universal Signal Conditioner a signal conditioning module capable of replacing most other SCMs without any hardware change. The USC701 can be configured on site without a lap top computer or extra power source of any kind using ... |
| HLP0008 | b) USC Config 106 Outline USC Configuration is a 32bit Windows computer program used to configure the USC701. The USC Configuration program requires a COA703 to connect the USC701 to an RS232 serial port on a personal computer. The configuration program UscConfig 106 ... |
| HLP1028 | c) AM702 Operating Modes The plug-on Access Module AM702 is menu structured for the selection of input/output/alarm variables and selection of calibration information. AM702 operating modes Run Mode . Configure Mode . Trim Mode . Hot Keys Mode Display Only ... |
| HLP0010 | Download USC Configuration Software Config 105 Changes , Config 106 Changes , User Guide A product SETUP installs run time files necessary to run the APCS program . A product PATCH copies selected files over the top of a previously setup APCS program . The product patch assumes ... |
| HLP1080 | e) USC701 And Data Acquisition The USC701 is not a data logger in that it does not store a history (other that moving data through 27 memories) for later re trivial, however there are four methods of getting data from the USC701 Using USC Config 106 (windows application) ... |