| Page | 01 |
|---|
| Article | Description / Summary |
|---|---|
| UAP1089 | Conductivity Controller / Transmitter The CDT728 is a special version of the USC701, this application is specifically designed for conductivity measurements. Description There are zero and scale factors for one range setting. The range switch is set on required sensitivity then ... |
| UAP1106 | Three Range Auto Calibration This application is for the CDT728 , a CDT728 is a special version of the USC701 specifically designed for conductivity measurements. The output OUT1 will transmit (usually 4-20mA) from memory 4 and should be calibrated in the engineering units ... |