| Page | 01 |
|---|
| Article | Description / Summary |
|---|---|
| UAP1099 | Automatic Zero and Span Using Push Buttons Operation The input measurement on channel 1 is zeroed to 0% out on memory 4 when switch S1 is closed (tare or known zero input). The input measurement on channel 1 is scaled to 100% out on memory 4 when switch S2 is closed (full scale input). ... |
| UAP0027 | Conveyor App Utilising HOT keys for Tare and Known Weight Cal In this application the USC701 converts the loadcell information to a 4-20mA analogue signal. Periodic loadcell calibration is achieved through an automated process using hot keys on the access module. Initial Setup The value of the test weight ... |
| UAP1119 | Offset And Span Calibration This application is used calibrate CH1 to two standard reference inputs, Ref_Low and Ref_Hi. The calibrated output appears on memory 4 (M4) for use as an output or further processing as required. Setup Import the application Use the input wizard ... |