| Page | 01 |
|---|
| Article | Description / Summary |
|---|---|
| UAP0036 | Display RPM, Power, Torque using hot keys Hot Key Description The USC701 is configured to utilise "HOTkeys" in the AM702. To enable these "HOTkeys" the USC701 must have its front panel Selector Switch set to "0" before the AM702 is positioned. In "Hotkey" mode, the keys can be pre-programmed ... |
| UAP1054 | kg/sec Material Flow Tx + Count This application uses a load cell that must be calibrated using application " UAP0016 , Measurement techniques with Load-Cell" to indicate the weight on the belt in the chosen unit of weight in this case kilograms (kg) on ... |