| Page | 01 |
|---|
| Article | Description / Summary |
|---|---|
| UAP0006 | Linearise a Portion of the Full Range Tables are used by the USC to linearise or correct for errors in an input signal. Each table has 101 points at exact even intervals of the input range. This type of correction works well if the points of non-linearity are over the whole input ... |
| UAP1121 | Output Shaping Plus Alarm Application Description CH1 measures 4-20mA. The input from CH1 is shaped with a lookup table created with the points shown below. The table results are saved in M4. M4 (shaped input from CH1) drives a 4-20mA output. RLY1 will switch on when ... |
| HLP1086 | USC701 Program Branching The USC701 can run different program instructions based on the value in the stack, the state of the relays, the state of the pulse inputs and keys on the AM702 ( hotkeys ). The program example shown ( UAP1096 ) uses branching to select either ... |