| Page | 01 |
|---|
| Article | Description / Summary |
|---|---|
| UAP1063 | Instantaneous/Total Flow from Pressure Sensor The basic flow is determined from a differential pressure sensor, this paticular application uses two sensors to improve sensitivity at the low end of the range; CH1 4-20mA measures 0-60mbar CH2 4-20mA measures 0-1300mbar When the pressure ... |
| UAP0015 | Ramp Up/Down To Control Pressure In this application the USC is acting as a simple controller. Input 1 is connected to a 4 to 20mA signal representing 0 to 1000 kPa pressure from a transducer. The USC will regulate a 0 to 6Vdc output on terminals 11 and 12 to go to the pressure-controlling ... |
| UAP0017 | Strain Gauge to detect extra material in Stamping Machine Operating Description Two or four strain gauge modules are mounted on the press face of a stamping machine to measure the stamping pressure. When in calibrate mode the machine is run under normal conditions, stamping one thickness of material, ... |