HLP1074 - Help Article

a < b > c

b- Use the modify wizard to change the input calibration to any special sensor types.

The Modify Wizard

10. Select CH1 as shown then press configure.
    
    
    
11. Click the small 'r' button to change the range on channel 1.
12. Select type = temperature, range = RTD 2W then next
13. Click on the required input range as shown.
    
    
    
14. Press next until the main prosperities screen appears.
15. Click on the AM702 button then configure, the following screen will appear
    
    
    
16. Uncheck ScaleMax and ScaleMin to prevent them from being changed during the tuning process.

c- Hot Keys Created With The PID Wizard